Seaball Blow Molding Machine
This seaball blow molding machine was designed for sea ball products only, which is suitable to produce LDPE material sea balls from 5cm to 10cm. Customer could either choose single die head or double die heads. Two sides working stations could be install deflashing devices to achieve automatic working process.
Customer could choose 65mm or 75mm screws, if customer needs 6 or 8 cavities per mold, then 75mm extruder is necessary, because it could make larger volume of plastic materials per hour.
The machine is automatic process, no need manpower for separate waste process.
Max. Product Size
Theoretical Production Capacity
Speed Regulating Method
Mold Board Width
Mold Board Distance
Mold Board Height
Oil Pump Motor
Screw Length/Dia. Rate
Main Machine Size
video demonstration is as below:
Below balls could be produced by our machine:
Auxiliary Machines(Need to use together with machine)
Only blow molding machine cannot operate, we should use the blow molding machine together with below auxiliary machines:
1, Air compressor: use to supply compressed air
2, Auto Loader: use to load virgin resins to the hopper of the extrudor
3, Chiller: use to cooling the molds, because after long time operation, the molds will become hot;
4, Crusher: for the waste material from the blow molding machine, crusher will break the waste material to be small pieces, so we could use the recycled materil to mix with virgin resins again(customer decied to reuse material depends on the actual condition).
5, Mixer: The recyled material will be mixed with virgin resins and use mixer to mix the materials averagely.