
Machine Photo
Esta máquina está especialmente diseñada para poticitos de material LDPE, la ventaja más maravillosa es que esta máquina podría lograr un proceso automático. El cliente podría obtener la botella final inmediatamente después de que las botellas salgan de la máquina; El proceso tradicional necesitará que las personas separen las botellas a mano.
Brindamos asesoría a los clientes con el fin de diseñar un proceso automático de botellas. Nuestro ingeniero podría diseñar las botellas según los requisitos del cliente, para que el cliente pudiera obtener el diseño único. Las botellas pueden poner un bloque extraíble para ayudar al cliente a ahorrar en el costo del molde.
Este tipo de máquina podría funcionar mejor con 6 estaciones, también podríamos producir 4 estaciones. Cada máquina equipada con funciones de destello automático. Los moldes de diseño especial podrían cumplir con los requisitos del cliente.
Videos Demo:
The LDPE molds:


The product photos as below:



Auxiliary Machines
Only blow molding machine cannot operate, we should use the blow molding machine together with below auxiliary machines:
1, Air compressor: use to supply compressed air

2, Auto Loader: use to load virgin resins to the hopper of the extrudor

3, Chiller: use to cooling the molds, because after long time operation, the molds will become hot;

4, Crusher: for the waste material from the blow molding machine, crusher will break the waste material to be small pieces, so we could use the recycled materil to mix with virgin resins again(customer decied to reuse material depends on the actual condition).

5, Mixer: The recyled material will be mixed with virgin resins and use mixer to mix the materials averagely.

Packing method:
